20/12/2016

Practical 4: Particle Size Analysis (Part B)

Title: Particle Size and Shape Analysis Using Microscope

Date of Practical
24 November 2016

Objective
  • To analyse and compare the sizes and shapes of different types of sand samples which are 150, 355, 500, 850µm and various sizes and powders such as lactose and microcrystalline cellulose (MCC)
  •  To study the distribution of particle size and shape

Introduction

In the pharmaceutical industries, powders and particles are widely used with range of objectives and application. Either they are directly used as catalyst, addictive and binders or they are used as raw ingredients. Therefore, particle size distribution play important role on the characteristics desired for a particular application or objectives of the final product. As a result, particle size analysis is essential for stabilizing or improving the characteristics, performance, or quality of powders or particle. For pharmaceutical products, smaller size of particles and well as spherical shape of powders is better since the total surface area are larger and they dissolve more quickly. In the case of particles in medical injection, the size of particles is the one that determines how they pass through or penetrate into the capillaries and blood vessel walls as well as which parts of the body they are reaching. This plays a major role on the efficacy and side effects of pharmaceuticals.

Microcrystalline cellulose (MCC) is normally used in solid forms, such as tablets in the pharmaceutical industries as it has excellent compressibility properties. MCC is a white and inert substances that is not degraded during digestion chemically. Laxative effect may occur if it is taken in large amount. In food, it may be used as anti-caking agent, stabilizers, texture modifier or suspending agent. On the other hand, lactose is milk sugar that is composed of one galactose and one glucose molecule. In the pharmaceutical industry, lactose is used to help forming tablets as it has excellent compressibility properties, same like MCC. Aside from that, lactose is also used to form diluent powder for dry-powder inhalations.

The main purpose of this practical is to analyse and compare sizes and shapes of different types of sands and powder. There are many ways to analyse particle shapes and sizes. One of it is by using a microscope. Small amount of each sand or powder is put and dispersed evenly at the glass rod on the microscope. The evenly distribution is to avoid analysis of agglomerated particles and looking directly to the particles in a microscopic view. The magnification of the microscope is set u and remain constant at 10X. In order to measure the diameters of respective particles, the equivalent method is by using the projected area diameter, projected perimeter diameter, Feret’s diameter as well as Martin’s diameter.


Experimental method
1   1. Using a microscope, 5 different types of sands and powders (microcrystalline cellulose and lactose) were analysed with emphasis on the size and shape of the particles.

2  2. The picture of the particles observed were captured and the general shape for the material was determined. 

Figure 1. The microscope used during the practical

Figure 2. The various types of sands (on the right hand side) and lactose and MCC (on the left hand side)

Results
*All the microscopic views are at 10X magnification

Figure 3. Microscopic view of lactose

Figure 4. Microscopic view of MCC

Figure 5. Microscopic view of sand of size 150µm

Figure 6. Microscopic view of sand of size 355µm

Figure 7. Microscopic view of sand of size 500µm

Figure 8. Microscopic view of sand of size 850µm
Figure 9. Microscopic view of various sizes of sand

Discussion
There are many ways to analyse particle sizes and shapes such as sieving, microscopy, sedimentation and others. To measure the particle size, it is best to use the method of Feret’s and Martin’s diameters as the diameters are dependent on both orientation and shape of the particles. Feret’s diameter refers to the mean distance between two parallel tangents to the projected particle perimeter while Martin’s diameter is the mean chord length of the projected particle perimeter which can be considered as the boundary separating equal particle areas. Thus, this method is suitable for unsymmetrical particles compared to projected perimeter and area diameter.

In this part of the experiment, light microscope is used to analyse these particles’ size and shape in two dimension. However, this method is not suitable for quality control as it only focuses on the sample and not the whole population. The magnification of the light microscope is fixed at 4x10 magnification. Based on the particle images, the overall shape of these particles is irregular and unsymmetrical while the sizes vary.

Generally, the size of powders is far smaller compared to the size of sands. Between sands, the size decreases from the largest size of sand which is 850, followed by 500, 355 and 150 µm. All the sands have irregular shapes with pointed edges while the powders have more granular shape without pointed edges. Between MCC and lactose, MCC is larger and acicular while lactose is smaller and more rounded.


Some of the precaution that should be taken in this experiment are, the powders or sands should be spread evenly to avoid agglomeration. Next, for cleanliness purposes, newspaper is used to cover the work bench so that, if any of the powders or sand spill, it can be easily clean. Goggle and mask should be worn to avoid any of the sample from being in contact with the eyes or inhaled. Lastly, the lens of the microscope should not be in contact with the sample to prevent any damage of the equipment.

Conclusion


In conclusion, the overall distribution of shape and size are able to determined which are asymmetrical and irregular. Therefore, different types of samples have different shape and size analysis. Thus, microscope method is the best techniques to be used as the light microscope allows the direct observation of the particles in order to analyse the shape and size of particles depending on the presence of agglomeration. Feret’s and Martin’s diameter are the best method to measure the diameter of the particles.

Question

1. Explain in brief the various statistical methods that you can use to measure the diameter of a particle.
         One method to measure the diameter of a certain particle is the projected area diameter. A three-dimensional object is projected on to an arbitrary plane and the two-dimensional area of the shape projected. The projected area diameter is measured based on the equivalent area. Another method is the projected perimeter diameter which is based on the circle having the same perimeter as the particle. Both these are inaccurate for unsymmetrical particle.

      Another method is measuring the Feret’s and Martin’s diameter. This method considers the orientation of the particle. Feret’s diameter is the mean distance between the two parallel tangents to the projected particle perimeter while Martin’s diameter is the mean chord length of the projected particle perimeter which can be considered as the boundary separating equal particle area.

      The other method is the Fourier analysis to provide an accurate quantification of particle morphology and texture. Three lower order Fourier descriptors, denoted “Signature Descriptors” provide measures of Elongation, Triangularity and Squareness, while the “Asymmetry” descriptor provides a measure of particle irregularity. They describe the overall shape of soil particles (defined as “morphology”). A summary of higher order descriptors provides textural information which is related to local roughness features (defined as “texture”).

2. State the best statistical method for each of the samples that you have analysed.
         The best statistical method to measure the samples in this experiment is the Feret’s and Martin’s diameter because this method takes into account the average diameter from many different orientations to produce a mean value for each particle diameter. This will give a more accurate value of the particle’s diameter. Since it accesses the 3-D image, electron microscope can be used because it considers the orientation and shape of the image. 

Reference

Dave, R. H. (2008, October 24). Overview of pharmaceutical excipients used in tablets and capsules. Retrieved from Drug Topics: Voice of Pharmacist: http://drugtopics.modernmedicine.com/drug-topics/news/modernmedicine/modern-medicine-news/overview-pharmaceutical-excipients-used-tablets

David W. L. (1991) Theory and Application of Morphological Analysis: Fine Particles and Surfaces. Retrieved from https://books.google.com/books?isbn=0849367778

Horiba. (2016). A Guidebook to Particle Size Analysis. Irvine, CA 92618 USA: Horiba Instruments, Inc. Retrieved from www.horiba.com/us/particle

Shimadzu. (2013). Particle Size Analyzers. Japan: Shimadzu Corporation. Retrieved from www.shimadzu.com/an/




No comments:

Post a Comment

Powered by Blogger.
Physicochemical Properties of Drugs © , All Rights Reserved. BLOG DESIGN BY Sadaf F K.