Title: Particle Size and Shape Analysis Using
Microscope
Date of Practical
24 November 2016
Objective
- To analyse and compare the sizes and shapes of different types of sand samples which are 150, 355, 500, 850µm and various sizes and powders such as lactose and microcrystalline cellulose (MCC)
- To study the distribution of particle size and shape
Introduction
In the pharmaceutical industries, powders and
particles are widely used with range of objectives and application. Either they
are directly used as catalyst, addictive and binders or they are used as raw
ingredients. Therefore, particle size distribution play important role on the
characteristics desired for a particular application or objectives of the final
product. As a result, particle size analysis is essential for stabilizing or
improving the characteristics, performance, or quality of powders or particle.
For pharmaceutical products, smaller size of particles and well as spherical
shape of powders is better since the total surface area are larger and they
dissolve more quickly. In the case of particles in medical injection, the size
of particles is the one that determines how they pass through or penetrate into
the capillaries and blood vessel walls as well as which parts of the body they
are reaching. This plays a major role on the efficacy and side effects of
pharmaceuticals.
Microcrystalline cellulose (MCC) is normally
used in solid forms, such as tablets in the pharmaceutical industries as it has
excellent compressibility properties. MCC is a white and inert substances that
is not degraded during digestion chemically. Laxative effect may occur if it is
taken in large amount. In food, it may be used as anti-caking agent,
stabilizers, texture modifier or suspending agent. On the other hand, lactose
is milk sugar that is composed of one galactose and one glucose molecule. In
the pharmaceutical industry, lactose is used to help forming tablets as it has
excellent compressibility properties, same like MCC. Aside from that, lactose
is also used to form diluent powder for dry-powder inhalations.
The main purpose of this practical is to analyse
and compare sizes and shapes of different types of sands and powder. There are
many ways to analyse particle shapes and sizes. One of it is by using a
microscope. Small amount of each sand or powder is put and dispersed evenly at
the glass rod on the microscope. The evenly distribution is to avoid analysis
of agglomerated particles and looking directly to the particles in a
microscopic view. The magnification of the microscope is set u and remain
constant at 10X. In order to measure the diameters of respective particles, the
equivalent method is by using the projected area diameter, projected perimeter
diameter, Feret’s diameter as well as Martin’s diameter.
Experimental method
1 1. Using a
microscope, 5 different types of sands and powders (microcrystalline cellulose
and lactose) were analysed with emphasis on the size and shape of the
particles.
2 2. The picture of the
particles observed were captured and the general shape for the material was
determined.
![]() |
| Figure 1. The microscope used during the practical |
![]() |
| Figure 2. The various types of sands (on the right hand side) and lactose and MCC (on the left hand side) |
Results
*All the microscopic views are at 10X magnification
![]() |
| Figure 3. Microscopic view of lactose |
![]() |
| Figure 4. Microscopic view of MCC |
![]() |
| Figure 5. Microscopic view of sand of size 150µm |
![]() |
| Figure 6. Microscopic view of sand of size 355µm |
![]() |
| Figure 7. Microscopic view of sand of size 500µm |
![]() |
| Figure 8. Microscopic view of sand of size 850µm |
![]() |
| Figure 9. Microscopic view of various sizes of sand |
Discussion
There are many ways to analyse particle sizes and
shapes such as sieving, microscopy, sedimentation and others. To measure the
particle size, it is best to use the method of Feret’s and Martin’s diameters as
the diameters are dependent on both orientation and shape of the particles.
Feret’s diameter refers to the mean distance between two parallel tangents to
the projected particle perimeter while Martin’s diameter is the mean chord
length of the projected particle perimeter which can be considered as the
boundary separating equal particle areas. Thus, this method is suitable for
unsymmetrical particles compared to projected perimeter and area diameter.
In this part of the experiment, light microscope is
used to analyse these particles’ size and shape in two dimension. However, this
method is not suitable for quality control as it only focuses on the sample and
not the whole population. The magnification of the light microscope is fixed at
4x10 magnification. Based on the particle images, the overall shape of these
particles is irregular and unsymmetrical while the sizes vary.
Generally, the size of powders is far smaller compared
to the size of sands. Between sands, the size decreases from the largest size
of sand which is 850, followed by 500, 355 and 150 µm. All the sands have
irregular shapes with pointed edges while the powders have more granular shape
without pointed edges. Between MCC and lactose, MCC is larger and acicular
while lactose is smaller and more rounded.
Some of the precaution that should be taken in this experiment
are, the powders or sands should be spread evenly to avoid agglomeration. Next,
for cleanliness purposes, newspaper is used to cover the work bench so that, if
any of the powders or sand spill, it can be easily clean. Goggle and mask
should be worn to avoid any of the sample from being in contact with the eyes or
inhaled. Lastly, the lens of the microscope should not be in contact with the
sample to prevent any damage of the equipment.
Conclusion
In conclusion, the overall distribution of shape and
size are able to determined which are asymmetrical and irregular. Therefore,
different types of samples have different shape and size analysis. Thus, microscope
method is the best techniques to be used as the light microscope allows the
direct observation of the particles in order to analyse the shape and size of
particles depending on the presence of agglomeration. Feret’s and Martin’s
diameter are the best method to measure the diameter of the particles.
Question
1. Explain in brief the various statistical methods that you can use to measure the diameter of a particle.
1. Explain in brief the various statistical methods that you can use to measure the diameter of a particle.
One method to measure the diameter of a certain
particle is the projected area diameter. A three-dimensional object is
projected on to an arbitrary plane and the two-dimensional area of the shape
projected. The projected area diameter is measured based on the equivalent
area. Another method is the projected perimeter diameter which is based on the
circle having the same perimeter as the particle. Both these are inaccurate for
unsymmetrical particle.
Another method is measuring the Feret’s and Martin’s
diameter. This method considers the orientation of the particle. Feret’s
diameter is the mean distance between the two parallel tangents to the
projected particle perimeter while Martin’s diameter is the mean chord length
of the projected particle perimeter which can be considered as the boundary
separating equal particle area.
The other method is the Fourier analysis to provide an
accurate quantification of particle morphology and texture. Three lower order
Fourier descriptors, denoted “Signature Descriptors” provide measures of
Elongation, Triangularity and Squareness, while the “Asymmetry” descriptor
provides a measure of particle irregularity. They describe the overall shape of
soil particles (defined as “morphology”). A summary of higher order descriptors
provides textural information which is related to local roughness features
(defined as “texture”).
2. State the best statistical
method for each of the samples that you have analysed.
The best statistical method to measure the samples in
this experiment is the Feret’s and Martin’s diameter because this method takes
into account the average diameter from many different orientations to produce a
mean value for each particle diameter. This will give a more accurate value of
the particle’s diameter. Since it accesses the 3-D image, electron microscope
can be used because it considers the orientation and shape of the image.
Reference
Dave, R. H. (2008, October 24). Overview
of pharmaceutical excipients used in tablets and capsules. Retrieved from
Drug Topics: Voice of Pharmacist:
http://drugtopics.modernmedicine.com/drug-topics/news/modernmedicine/modern-medicine-news/overview-pharmaceutical-excipients-used-tablets
David W. L. (1991) Theory and Application of Morphological Analysis: Fine Particles and Surfaces. Retrieved from https://books.google.com/books?isbn=0849367778
Horiba. (2016). A Guidebook to
Particle Size Analysis. Irvine, CA 92618 USA: Horiba Instruments, Inc.
Retrieved from www.horiba.com/us/particle
Shimadzu. (2013). Particle Size
Analyzers. Japan: Shimadzu Corporation. Retrieved from
www.shimadzu.com/an/








